Question 1

How to rename downloaded charts?

Francis · Accepted Answer

In order to rename a chart area, you have to do a long click/tap on its name. This will bring up the keyboard, allowing you to change the name:

Please note that unlike GRIBs, downloaded charts are not synchronized, and therefore neither is the name.

Question 2

How to rename downloaded charts?

Francis · Accepted Answer

In order to rename a chart area, you have to do a long click/tap on its name. This will bring up the keyboard, allowing you to change the name:

Please note that unlike GRIBs, downloaded charts are not synchronized, and therefore neither is the name.

Question 3

How do I adjust the target position?

Francis · Accepted Answer

By default, the target is placed in the center of the screen, allowing you to drag the map underneath it and use the zoom to position it at a specific location.

However, you can lock the target to other elements, or even disable it.

Tap/click on the layers button.

In the “Target” drop-down menu, select which element you want to lock the target to:

Disabled (to remove the target from the screen)
Screen center (to place it to its original location)
GPS position (to place it on your boat)
A POI

You can also lock the target onto a POI by editing it.

Question 4

How do I change the instruments displayed?

Henri · Accepted Answer

Customizing the Instrument Panel

To change the displayed instruments, open the right panel using the gear button at the top right of the screen, then select Instruments.

You will see several settings:

Visible — Show or hide the entire instrument bar.
Number of instruments — You can display between 2 and 15 instruments at the same time.
Mini charts — When enabled, a small chart appears under each instrument showing how the value has evolved over the last 5–20 minutes.
Orientation — Choose between vertical or horizontal layout, or leave it on automatic (it adapts to your screen width).
Scrolling — In horizontal mode (especially on phones), you can scroll the instrument bar to the right to see more instruments.
Instrument size — Adjust the size as you prefer. Increasing it makes the values easier to read — even without glasses!

Personalizing your setup

On a computer, right-click an instrument. On a mobile device, perform a long tap.
A list of parameters appears — select the one you want to assign to that instrument.

Saving a configuration

To save a configuration, press the Save Configuration button, enter a name, and confirm to save it.

Saved configurations are specific to each device — they are not synchronized between your phone and your computer, ensuring optimized layouts for each screen.

How to rename downloaded charts?

How to rename downloaded charts?

Contact

Politique de confidentialité

Conditions Générales d’utilisation

How to rename downloaded charts?

How to rename downloaded charts?

Related Posts

How do I adjust the target position?

How do I change the instruments displayed?

Comment renommer les cartes téléchargées ?

Comment importer des POIs et des routes

Contact

Politique de confidentialité

Conditions Générales d’utilisation