NavimetriX receives data from your instruments, GPS and AIS as NMEA 0183 sentences, over UDP, TCP or a serial port (Settings > GPS & NMEA, NMEA switch on). Incoming sentences scroll in the Incoming NMEA sentences console at the bottom of that page.
Sentences read
| Sentence | Data read |
|---|---|
| Position and GPS | |
| RMC | Position, speed over ground (SOG), course over ground (COG), time and date |
| GGA | Position, time, satellites in use, accuracy (HDOP) |
| GLL | Position |
| VTG | Speed over ground (SOG), course over ground (COG) |
| GNS | Satellites in use, accuracy (HDOP) |
| GSA | Satellites in use, accuracy (HDOP) |
| GSV | Satellites in view |
| Heading and speed through water | |
| HDG | Magnetic heading (true heading derived with the variation) |
| HDM | Magnetic heading |
| HDT | True heading |
| VHW | Speed through water (STW) and heading |
| VBW | Speed through water (STW), only when VHW is not received |
| ROT | Rate of turn |
| Wind | |
| MWV | Apparent wind (reference R) or true wind (reference T): angle and speed |
| VWR | Apparent wind: angle and speed |
| VWT | True wind: angle and speed |
| MWD | True wind: direction and speed |
| Depth, rudder, sensors | |
| DPT | Depth, including the offset set on the echo sounder |
| DBT | Depth below transducer |
| RSA | Rudder angle |
| MTW | Water temperature |
| MDA | Barometric pressure, air and water temperature |
| XDR | Heel, roll, rudder angle, temperatures, barometric pressure, batteries (see Which NMEA0183 XDR sensors can I use?) |
| AIS | |
| VDM | AIS targets received by your receiver or transponder |
Sentences not read
RMB, WPL, APB, XTE, BOD and BWC are not read: distance, bearing, VMC and time to the waypoint are computed by NavimetriX from your route or your "Goto". VLW (log distance), ZDA (time only) and VDO (your own boat's AIS position) are not read either.
When one value arrives in several sentences
NavimetriX watches which sentences actually arrive and, for some values, keeps only one, in this order:
- Heading: HDG, otherwise HDT, otherwise VHW
- Apparent wind: MWV, otherwise VWR
- Received true wind: MWD, otherwise MWV
- Depth: DBT, otherwise DPT
- Speed through water: VHW, otherwise VBW
This choice is made again regularly: if the selected sentence stops arriving, the next one takes over.
By default, true wind is recomputed by NavimetriX from apparent wind, boat speed and heading. In Advanced mode, setting True wind to Instruments shows the true wind sent by your instruments (MWV T, VWT, MWD).
With several links (Advanced mode), the position comes from the link selected in GPS source. For other data, when two links send the same sentence, Instruments wins, then GPS, AIS and the additional links. AIS targets from all links are merged.