NMEA data streamed by an NMEA gateway, a multiplexer, or any other instrument broadcasting on a serial port via a USB connection is supported on computers (macOS, Windows, Linux).
Phones and tablets have no serial port: the SERIAL choice is greyed out there. NMEA is a Premium subscription feature.
Prerequisites
Gateways that present themselves as a standard serial port usually need no driver. Otherwise, install the manufacturer's driver (often FTDI or Prolific).
Setup
Open Settings by tapping the chevron handle (‹) on the right edge of the screen, then select GPS & NMEA.
Once the gateway is connected and transmitting, the simplest way is to press Scan NMEA devices, then Start Scan. On a computer, the scan also tries each serial port at 9600, 4800, 38400 and 115200 baud. Then press Apply settings: NavimetriX sets the protocol, port and baud rate, turns the NMEA switch on and, if the stream carries a position, sets GPS source to NMEA.
You can also set everything by hand:
- GPS source = NMEA
- NMEA switch = on
- NMEA Protocol = SERIAL
- Serial port = the gateway's port.
- Baud rate = the gateway's rate (4800, 9600, 38400 or 115200; 9600 by default).
The data stream should scroll in the Incoming NMEA sentences console at the very bottom of the page.